Engineered Prime Oak

These European manufactured boards have excellent production credentials. Good length specification. Each board is machined with tongue and groove with ends matched and fit tight unlike many cheap alternatives that have a loose T & G which can impact the finished floor quality. These boards are made to order allowing a wide choice in widths and finishes to be delivered within 3-5 weeks.

Widths: 140, 160, 180, 200, 220, 240, 260, 280, 300, 320mm

Widths XL & XXL Planks: 180, 200, 220, 240, 260, 280, 300, 320, 340, 360, 380, 400mm

Lengths: Random lengths 600-2500mm (80% over 1800mm)

Lengths XL planks: Random lengths 3000-5000mm (max 10% shorter)

Lengths XXL planks: Random lengths 5000-7300mm (max 10% shorter)

Thickness: 2 layer 15/3.5mm, 20/5.5mm (XL and XXL only 20/5.5mm)

Bevel Options: Micro Bevel 1mm, Standard bevel 2mm, Square Edge (recommended for unfinished floors)

Herringbone sizes: 90 x 450, 120 x 600, 150 x 700, 180 x 900, 200 x 1000mm

Chevron Sizes 45° or 30°: 90 x 450, 120 x 600, 150 x 700, 180 x 900, 200 x 1000mm

Options on treatments and finishes:

Brushing

Band sawing

Distressing (tumbling)

Bevelled at short ends

4-sides Antique/aged bevel

2-sides handscraped bevel

Planed look

Chisel Planed (max. 300 mm width)

Smoking (single, double or intense)

Staining (colour stain/reactive stain)

Oil finishing 1st coat natural/colour

Oil finishing 2nd coat

Invisible finish ('Raw')

Lacquering (anti-scratch)

Grading for standard sizes:

Prime: Healthy knots (filled) with a maximum of 15 mm. No open defects, less colour variation. No sapwood and no end cracks allowed.

Rustic A: Healthy knots (filled) with a maximum of ± 35 mm. Less colour variation. No sapwood and no end cracks allowed.

Rustic B: Healthy knots (filled) with a maximum of ± 60 mm (240 mm and wider up to ± 80 mm). Colour variation allowed. Occasionally a little sapwood permitted and end cracks of max. 100 mm allowed.

Rustic A/B: A mix grade of Rustic A and B, however without sapwood and without end-cracks.

Grading for XL and XXL:

Nature: Very little colour variation, no sapwood, no cracks. Boards up to 280 mm wide: occasional healthy knots (filled) with a diameter of maximum ± 20 mm permitted. Boards 300 mm wide and wider: occasional healthy knots (filled) with a diameter of maximum ± 25 mm permitted.

Character: Some colour variation, no sapwood, no cracks. Boards up to 280 mm wide: healthy knots (filled) with a diameter of maximum ± 40 mm permitted. Boards 300 mm wide and wider: healthy knots (filled) with a diameter of maximum ± 60 mm permitted.