Raw Effect Oak

Brushed Raw Effect Oak Flooring, also known as invisible finish. This oak floor retains the natural colour of unfinished oak. The ultra matt look is achieved with a hard wearing lacquer finish suitable for kitchens and high traffic areas.

Widths: 140, 160, 180, 200, 220, 240, 260, 280, 300, 320mm

Widths XL & XXL Planks: 180, 200, 220, 240, 260, 280, 300, 320, 340, 360, 380, 400mm

Lengths: Random lengths 600-2500mm (80% over 1800mm)

Lengths XL planks: Random lengths 3000-5000mm (max 10% shorter)

Lengths XXL planks: Random lengths 5000-7300mm (max 10% shorter)

Thickness: 2 layer 15/3.5mm, 20/5.5mm (XL and XXL only 20/5.5mm)

Bevel Options: Micro Bevel 1mm, Standard bevel 2mm, Square Edge (recommended for unfinished floors)

Herringbone sizes: 90 x 450, 120 x 600, 150 x 700, 180 x 900, 200 x 1000mm

Chevron Sizes 45° or 30°: 90 x 450, 120 x 600, 150 x 700, 180 x 900, 200 x 1000mm

Options on treatments and finishes:

Brushing

Band sawing

Distressing (tumbling)

Bevelled at short ends

4-sides Antique/aged bevel

2-sides handscraped bevel

Planed look

Chisel Planed (max. 300 mm width)

Smoking (single, double or intense)

Staining (colour stain/reactive stain)

Oil finishing 1st coat natural/colour

Oil finishing 2nd coat

Invisible finish ('Raw')

Lacquering (anti-scratch)

Grading for standard sizes:

Prime: Healthy knots (filled) with a maximum of 15 mm. No open defects, less colour variation. No sapwood and no end cracks allowed.

Rustic A: Healthy knots (filled) with a maximum of ± 35 mm. Less colour variation. No sapwood and no end cracks allowed.

Rustic B: Healthy knots (filled) with a maximum of ± 60 mm (240 mm and wider up to ± 80 mm). Colour variation allowed. Occasionally a little sapwood permitted and end cracks of max. 100 mm allowed.

Rustic A/B: A mix grade of Rustic A and B, however without sapwood and without end-cracks.

Grading for XL and XXL:

Nature: Very little colour variation, no sapwood, no cracks. Boards up to 280 mm wide: occasional healthy knots (filled) with a diameter of maximum ± 20 mm permitted. Boards 300 mm wide and wider: occasional healthy knots (filled) with a diameter of maximum ± 25 mm permitted.

Character: Some colour variation, no sapwood, no cracks. Boards up to 280 mm wide: healthy knots (filled) with a diameter of maximum ± 40 mm permitted. Boards 300 mm wide and wider: healthy knots (filled) with a diameter of maximum ± 60 mm permitted.