Engineered Oak Rustic AB
These European manufactured boards have excellent production credentials. Good length specification with only approximately 10% of boards being less than 2000mm. Each board is machined with tongue and groove with ends matched and fit tight unlike many cheap alternatives that have a loose T & G which can impact the finished floor quality. These boards are made to order allowing a wide choice in widths and finishes to be delivered within 2-3 weeks.
Options include sanded and unfinished for finishing on site once installed or oiled with 2 coats of hard wax oil. Other finishing options include planed which provides a natural distressed look to the floor with natural variation in texture where some areas will feel smooth and other areas a slight rougher feel to the floor typically around knots where the timber is harder. Alternatively choose sanded smooth for a smooth finish. Options for edge profile include micor bevel or square edge. Rustic AB is a mixture of 2 grades, Rustic A with knots up to 35mm but no sapwood and Rustic B with knots up to 70mm with sapwood.
15mm (4mm Oak wear layer) or 20mm Engineered (5mm Oak wear layer)
Unfinished, oiled (2 coats of Hard Waxoil), brushed, planned, unfilled or filled with resin filler
micro bevel long sides or square edge or square edge and scraped for slightly distressed look
Rustic AB (knots up to 70mm and some sap included)
180/200/220/260 x 15/20 x 2000 – 2200mm (mixed length) with approx 10% less than 2000mm
High Traffic Areas
Installation & Maintenance
Secret Nail or Glue Down – For guidance and advice please visit our installation and maintenance instructions.
Can darken slightly with direct sunlight
Standard White Oak has 1360 Janka Rating
EC timber and production
|Surface & Treatments